Please ensure all fields are filled in completely.
To view previous winner: Click Here


Personal Information:


Going to college is a big financial commitment. Write an essay that outlines how much you expect to spend to finish your schooling, how you intend to pay for your schooling, and what you expect your job to be once you are finished your schooling. There is no word limit for the essay.

Hydraulic Pumps, Valves and Cylinders

Hydraulic Pumps, Valves and Cylinders - A lot of lift trucks are powered using liquid propane. Although several facilities would have refuelling capabilities on location, many will have cylinders brought to their office instead. If a lift truck runs out of fuel, the cylinders are changed. A few cautions and training is necessary whenever dealing with propane as it is a very combustible matter.

PPE or Personal Protective Equipment, must be worn when refilling or changing a lift truck cylinder. The liquid is really cold and could lead to irritation or burning when it comes into skin contact. At all times wearing thick leather gloves would help protect hands. Goggles or other standard eyewear together with a face shield is likewise highly recommended. Having a fire extinguished nearby is also recommended before the refuelling method begins.

Make sure that the surroundings are safe from any open fires or lit cigarettes. Locate the fill valve on the cylinder and remove the cap. After that you can attach the fill line to the fill valve. When the fill line is in place, carefully open the bleed valve. This will be a small circular knob on the cylinder that is commonly brass coloured. A hissing sound can escape when the valve is open and this is normal so long as it is just air being vented and not actual propane.

Open the valve extremely slowly on the fill line, listening for whichever leaks. If there are no leaks, then the valve could be safely opened. The sounds of fuel entering the tank should be audible. Never leave the tank unattended whenever refuelling and look at the bleeder valve all through the process. A spray of white propane gas will emit from the bleeder valve as soon as the tank is full. Turn the fill valve off entirely and after that close the bleeder valve. Very unhurriedly and cautiously remove the fill line from the tank. Watch for any excess gas caught in the coupling which would be expelled when the seal is broken. It should only be a small amount of gas and is normal. Replace the protective cover on the fill valve. Double check all valves are completely closed. The tank is now set and full to use.

Click to Download the pdf

Forklift Parts

  • Stacker Forklift Attachments
    Attachments for Stacker Forklifts - A pallet stacker is a type of pallet jack that is utilized to transport, stack and lift palletized goods that are too heavy for manual lifting. Its key function is to load and unload pallets on trucks, as well ...
  • Heavy Duty Scissor Lift Parts
    Heavy Duty Scissor Lift Part - Scissor lifts could help transfer different stuff, normally used to be able to lift truck employees to heights for certain tasks. This is accomplished by raising and lowering the platform. The scissor lift truck is ...
  • Concrete Hopper
    Concrete Hopper - The self-dumping hopper attachment can automatically start to both dump and release when the bumper release contacts the side of a dumpster. As soon as unloading is finished, the hopper can return to original locked and upright ...
  • Adjustable Jibs
    Adjustable Jib - Usually a forklift jib can be amongst the most helpful tools that any construction firm can put money into for carrying and moving industrial equipments on the job site. Jib boom forklift attachments are really less expensive ...
  • Parts for Industrial Scissor Lift
    Parts for Industrial Scissor Lift - The scissor lift, often identified as a table lift, is an industrialized lift that has been customized for usage within wholesale and retail environments. Industrial platform lifts have been utilized for ...
  • Forklift Alternator
    Forklift Alternator - An alternator is a machine that transforms mechanical energy into electric energy. This is done in the form of an electrical current. In principal, an AC electric generator could be labeled an alternator. The word normally ...
  • Utility Bucket
    Utility Bucket - Universal Fit buckets also known as "slip-on-the-forks" forklift attachment buckets. These buckets can be utilized with whatever model and make of extendable reach forklift. If your unit can't be matched with a quick-tach unit, ...
  • Lull Telehandler Part
    Lull Telehandler Parts - Lull telehandlers have been providing precision load placement ever since 1959. Whether the work entails positioning heavy steel, landing loads on scaffolding or transferring loads, utilizing a Lull telehandler will help ...

Lift Parts Express

We have first-rate prices on all our lift-truck parts. Call now to get a quote on one of the attachments or parts we offer. Call us at:

TOLL FREE: 1-888-695-7994

Email Us
About Us